Sparkler Type Filter Press
|Horizontal filter press is a sparkler type and consist of s. S. Shell &top cover using bolts to give pressure tight enclosure. The filter cartridge assembly inside the shell consists of several horizontally arranged disc type filter plates with perforated supporting screens, filter media &interlocking cups. The entire assembly complete with pump &piping connection is mounted on a suitable s. S. Trolley. |
Standard flow type: The impure liquid to be filtered is fed to the filter shell by pump. It arrives on top of each plate through opening on the sides of plates. As liquid pressure increases, the filter media (paper/fabric) holds back the impurities &allows the crystal clear filtrate to pass through the central channel (formed by interlocking cups) which takes the filtrate to the outlet of filter. This filter most commonly used to obtain clear liquid. However if required, the cake formed between the plates can be obtained. Filtration is continued until its rate becomes very slow due to increased cake resistance.
Manufactured in s. S.304/s. S.316/s. S.316l m. O. C
M. S/s. S. Jacket can be provided for hot filtration.
Gives crystal clear filtration by filtering particles up to 1 micron size.
Scavenger arrangement to remove all the liquid.
Cake can be dried either by compressed air or by insert gas, steam.
Filtration rates from 600 ltrs/hr. To 30000 ltrs/hr possible depending on the models.
Centrifugal/gear/lobe pumps can be offered, which can also be used for liquid transfer.
Sample collecting device &safety valve provided
Please use contact form for send message directly to seller. Your message will be sent directly to the recipient and will not be publicly displayed.