YSD Conventional Hydraulic Press Brake
|1. Technical specifications of PPT100/30: |
Pressing force:100 ton
Distance between uprights:2550 mm
Stroke of ram 130 mm
Adjustment of ram stroke 110 mm
Max. Distance between table and ram:310 mm
Depth of throat:300 mm
Width of table:180 mm
Approach speed:100 mm/sec.
Working speed:8 mm/sec.
Return speed:60 mm/sec.
Motor power:5.5 kw
Back gauge distance 600 mm
Volume of oil tank 125 L
2. Standard feature:
Made under technology from LVD, Belgium.
Synchronization achieved through torsion bar.
With reliable hydraulic system: To ensure minimum maintainance, integrated Mono-block hydraulic system and worldwide famous valves and seals are adopted, the pipeline and connections are reduced to the minimum level. High efficiency pump with low level sound, temperature gauge on oil filter and double-acting cylinders ensure high reliability and safety.
With overload protection reliability.
The electrical components are selected in accordance with DIN or ISO standard.
3. Standard of equipment on the press brake:
One set of straight up tool R10 and multi Vee die block M90A length 3050mm.
Manual adjustment back gauge.
Manual adjustment bending depth.
Manual adjustable crowning on table.
Working table with T-slot on both front and back side.
With two front supporting arm mounting on the table.
Control panel on electrical cabinet.
Double foot switch with emergency stop button.
One copy of operation and maintenance manual in English.
4. Key components on the machine.
Valves: REXROTH, Germany
Oil seals: NOK, Japan
Pump: NACHI, Japan
Electrical components: TELEMECANIQUE, France
Pressure gauge: HAWE, Germany
Motorized or NC back gauge
Motorized or NC bending depth
Please use contact form for send message directly to seller. Your message will be sent directly to the recipient and will not be publicly displayed.